Lenze E84DGFCP - Manual (Page 33)

EDS84DMOTPBUS EN 3.0 - 11/2011
L
33
Communication manual 8400 motec PROFIBUS
Commissioning
Initial switch-on
6.4 Initial switch-on
Establishing communication
 To establish a communication, the controller must be supplied with mains voltage.
 By means of the external voltage supply it is possible to maintain PROFIBUS
communication if the main supply fails.
 External voltage supply
( 27)
 All parameters (codes) and DIP switch settings are read in at mains connection.
 If an error occurs during this process, the "CE04: MCI communication error" error
message (error no. 01.0127.00002) is output.
 The settings of the DIP switches determine whether the station address is selected
automatically by the PROFIBUS master or via code C13899 .
 Possible settings via DIP switch
( 30)