These operating instructions are valid for – Lenze EMF2112IB User Manual
Page 2
These Operating Instructions are valid for fieldbus modules with the following nameplates:
2112
IB.
VA.
0.1
(INTERBUS-Loop)
In connection with the unit series as from the nameplate data:
820X
E.
2x.
1x.
(8201 - 8204)
820X
E./C. 2x.
1x.
Vxxx
(8201 - 8204)
821X
E.
2x.
2x.
(8211 - 8218)
821X
E./C. 2x.
2x.
Vxxx
(8211 - 8218)
822X
E.
1x.
1x.
(8221 - 8225)
822X
E.
1x.
1x.
Vxxx
(8221 - 8227)
82EV
VA
0x
8200 vector
82EV
1x
0x
8200 vector
93XX
E.
2x.
1x.
(9321 - 9333)
93XX
E./C. 2x.
1x.
Vxxx
(9321 - 9333)
Type
Design:
E = Built-in unit IP20
IB = Module
Hardware version and index
Software version and index
Variant
Explanation
Important:
These Operating Instructions are only valid together with the corresponding Instructions for
82XX, 8200 vector or 93XX controllers.
. 1998 Lenze GmbH & Co KG
Without written approval of Lenze Lenze GmbH & Co KG no part of these Instructions must be copied or given to third parties.
All information given in this documentation have been checked for compliance with the hardware and software described. Nevertheless, deviations and
mistakes cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur. Necessary corrections will be included
in the next edition.
Version
1.0
03/00
Show/Hide Bookmarks