Lenze EMF2112IB - Manual (Page 5)

Preface and general information
1-1 BA2112EN
1 Preface and general information
1.1 About these Operating Instructions
•
These Operating Instructions are intended for safety-relevant working on and with the 2112
fieldbus module. They contain safety information which must be observed.
•
All personnel working on and with the 2112 fieldbus module must have these Operating
Instructions available and observe the information and notes relevant for them.
•
The Operating Instructions must always be complete and perfectly readable.
These Operating Instructions inform about the most important technical data and the installation of
the 2112 fieldbus module. They are only valid in combination with the Operating Instructions of the
corresponding controller.
1.1.1 Terminology used
Controller In the following, the term ”controller” is used for ”93XX servo inverters” or ”82XX frequency inverters”.
Drive system In the following the term ”drive system” is used for drive systems with fieldbus modules and other Lenze
drive components.
Fieldbus module In the following text, the term ”fieldbus module” is used for the fieldbus module type 2112 INTERBUS-Loop.
( › xx-yyy) Cross reference (chapter - page)
1.2 Items supplied
Items supplied Important
•
1 2112 fieldbus module with housing (enclosure IP20)
•
1 M3 fixing screw
After the delivered has been received, check immediately whether the
items supplied match the accompanying papers. Lenze does not
•
1 M3 fixing screw
•
2 2-pole connection plugs for INTERBUS-Loop connection
•
1 Mo nting Instr ctions
items supplied match the accompanying papers. Lenze does not
accept any liability for deficiencies claimed subsequently.
Claim
•
1 Mounting Instructions Claim
•
visible transport damage immediately to the forwarder
•
visible deficiencies/incompleteness immediately to yo r Lenze
•
visible deficiencies/incompleteness immediately to your Lenze
representative.
Show/Hide Bookmarks