This function library can be used for – Lenze DDS Function library IOSystem User Manual
Page 2
![background image](/manuals/566036/2/background.png)
The LenzeIOSystem.lib and LenzeIOSystemVxxxx.lib function libraries can be used for
the following Lenze PLC devices:
Type
As of hardware version
As of software version
Drive PLC
EPL10200_xI
VC
2.x
Drive PLC
EPL10200_xT
VC
2.x
9300 Servo PLC
EVS93xx_xI
2K
2.x
9300 Servo PLC
EVS93xx_xT
2K
2.x
ECSxA
ECSxAxxx
1C
7.0
Important note
:
The software is supplied to the user as described in this document. Any risks resulting from its quality or use remain the responsibility
of the user. The user must provide all safety measures protecting against possible maloperation.
We do not take any liability for direct or indirect damage, e.g. profit loss, order loss or any loss regarding business.
ã 2006 Lenze Drive Systems GmbH
No part of this documentation may be copied or made available to third parties without the explicit written approval of Lenze Drive
Systems GmbH.
All information given in this documentation has been carefully selected and tested for compliance with the hardware and software
described. Nevertheless, discrepancies cannot be ruled out. We do not accept any responsibility or liability for any damage that may
occur. Required corrections will be included in updates of this documentation.
All product names mentioned in this documentation are trademarks of the corresponding owners.
Version 1.7
11/2006