Lenze DDS Function library IOSystem - Manual (Page 27)

Function library LenzeIOSystem.lib
Function blocks
4.4 L_IOParAlAOModule − Parameterisation function
4−9
L
LenzeIOSystem.lib EN 1.7
4.4 L_IOParAlAOModule − Parameterisation function
Function block L_IOParAIAOModule parameterises the analog input and output modules
EPM−T330, a High edge at input
bExecute starting the parameterisation process.
Every module has four channels that can each be set individually. Two analog inputs and two analog
outputs are available.
The following functions can be set:
·
Voltage measuring
·
Current measuring
·
Voltage output
·
Current output
The function block output indicates the transmission status and information on linked modules.
bEnableDiagnosticAlarm
byFunctionInput_CH1
bEnableAnalogInterrupt
bySampleRate_CH1
L_IOParAIAOModule
bExecute
byNodeAdr
nState
CTRL
byAnalogModuleNo
bySampleRate_CH2
byFunctionOutput_CH3
byFunctionOutput_CH4
byFunctionInput_CH2
EPM-T110
Ixxxh
EPM-T111