Lenze DDS Function library IOSystem - Manual (Page 23)

Function library LenzeIOSystem.lib
Function blocks
4.2 L_IOParAlnModule − Parameterisation function
4−5
L
LenzeIOSystem.lib EN 1.7
ð Inputs (Variable type: VAR_INPUT)
Variable name Data type Information/possible settings
bExecute BOOL Execute write request
FALSE ä TRUE Write request is executed
byNodeAdr Byte Device address: 1 − 63
byAnalogModuleNo Byte Slot number
·
The analog module that is mounted first has the slot number 1.
·
Maximally 16 analog modules can be attached.
bEnableDiagnosticAlarm BOOL Enable diagnostics alarm
TRUE Diagnostics alarm is enabled
bEnableAnalogInterrupt BOOL Enable analog data transmission
TRUE Data transmission is enabled
byFunctionInput_CH1
...
byFunctionInput_CH4
Byte Parameterise function
Default ±10V function code = 3B
h
^ 6−1
bySampleRate_CH1
...
bySampleRate_CH4
Byte Select number of conversions per second
0 15 conversions
1 30 conversions
2 60 conversions
3 123 conversions
4 168 conversions
5 202 conversions
6 3.7 conversions
7 7.5 conversions
bySelectionFcn_CH1
...
bySelectionFcn_CH4
Byte Selection
0 Selection deactivated
1 Use 2 of 3 values
2 Use 4 of 6 values
byHysterese_CH1
...
byHysterese_CH4
Byte Hysteresis
0 Hysteresis deactivated
1 Hysteresis ±8
2 Hysteresis ±16
byTriggerSelection_CH1
...
byTriggerSelection_CH4
Byte Transmission result
0 Use default settings
1 Upper limit value exceeded
2 Lower limit value not reached
3 Input value has changed by a defined value.
byTriggerValue_CH1
...
byTriggerValue_CH4
DWORD Value selection for a transmission event
2 Default