Lenze PLC Designer V2.x - Manual (Page 222)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS/9400/8400 - "LAS_40_INTF_84SL_Speed_94HL_Speed_ECSPosShaft" sample project
222
L
1.3 EN - 07/2012
8.9.3.4 Service mode
 Button  selects the service mode.
 In the area - the service modes of the respective controller are shown:
 In area , status information is displayed and errors can be reset.
 The buttons in area  start/stop the motion profile.
 Display field  shows the mode status.
 Display field  shows the current speed setpoint.
– Possible setpoint data for the motion profile: 0 ... 100%.
 Select mode ECS xP (ID=0)
9400 HighLine
8400 StateLine

• CAN status
• Error message
display
• Error reset

Start: start sequence
Stop: stop sequence

Mode status

Setpoint speed

Actual speed

Only CW rotation