Lenze PLC Designer V2.x - Manual (Page 263)

1.3 EN - 07/2012
L
263
PLC Designer V2.x| Lenze Application Samples
The L_SCS_DriveECS.lib library
L_SCS_SupplyModule - actuation of the ECS servo system power supply module
13.4 L_SCS_SupplyModule - actuation of the ECS servo system power supply module
This FB serves to control the ECS Lenze servo system power supply module.
Inputs
Outputs
Identifier/data type Information/possible settings
scDriveControl
SCS_Control_Supply
Structure for drive control
xOptional
BOOL
Optional setting for the CAN node
• TRUE: The CAN node is set to the "Optional" mode to be able to receive PDOs.
• FALSE: Normal operation (transmission and reception via PDO).
byNodeNumber
BYTE
Node number
byMasterNumber
BYTE
Interface number (0...3)
Identifier/data type Information/possible settings
scDriveStatus Structural data regarding the drive status
xInternalControlActiv
BOOL
TRUE: Internal control active