Lenze PLC Designer V2.x - Manual (Page 83)

1.3 EN - 07/2012
L
83
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
9400 HighLine - "LAS_40_INTF_Can_94HL_Speed" sample project
8.3 9400 HighLine - "LAS_40_INTF_Can_94HL_Speed" sample project
Further information on the function libraries used in this project can be found in
the following section:
 The L_S94_Drive9400.lib library
( 246)
Standard procedure

How to commission the controller:
1. Commission the 9400 HighLine.
2. Load the project "LAS_40_INTF_Can_94SL_Speed.zip" to the controller using the L-
force »Engineer«.

Open the »Engineer« project & go online
( 85)
3. Open the "LAS_40_INTF_Can_94HL_Speed.pro" sample project in the »PLC
Designer«.  Program structure in the »PLC Designer«
( 87)
4. Load the project to the IPC/EL 1xx and go online.