Lenze PLC Designer V2.x - Manual (Page 54)

PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8400 StateLine - "LAS_40_INTF_Can_84SL_Speed" sample project
54
L
1.3 EN - 07/2012
8.1.4.5 Parameter transfer
The Parameter button selects the visualisation of the parameter FBs.
 The mode selected last remains active.
 You can use the FBs to...
– read individual parameters
– write individual parameters
– write a fixed parameter list
 Area  shows the FB for reading parameters.
 Area  shows the FB for writing a parameter table.
 Area  shows the FB for writing parameters.
– The parameters read can be viewed in the »PLC Designer« on the Blocks tab in the
Parameter transfer directory of FB L_S84_SDOList84SL.
 Read parameters  Write parameters
 Write parameter table