Lenze PLC Designer V2.x - Manual (Page 231)

1.3 EN - 07/2012
L
231
PLC Designer V2.x| Lenze Application Samples
Diagnostics
What to do if the PLC is not running?
10 Diagnostics
10.1 What to do if the PLC is not running?
10.1.1 The PLC was exited on the target system
The Industrial PCs (EL and CPC series) and the EL100 are supplied with an automatically
starting PLC by default. After the starting process a dialog window shows the status of the
PLC:

Tip!
After clicking the Shutdown button unintentionally, it is recommended to restart
the IPC/EL1xx, to reactivate the PLC (with little effort).
Button Function
Stop Stop pauses the PLC
Reset Reset resets the PLC program
Shutdown Shutdown exits the PLC