Lenze PLC Designer V2.x - Manual (Page 33)

1.3 EN - 07/2012
L
33
PLC Designer V2.x| Lenze Application Samples
Commissioning a sample project
General system structure
7 Commissioning a sample project
This chapter describes the commissioning of a sample project by means of examples. The
following requirements have to be met, so that the respective sample project can be used.
7.1 General system structure
The Lenze project examples are based on the following system structure.
 An Industrial PC (Logic) or an EL1xx (Logic) is the central control section of the system
configuration.
[7-1] System structure with an Industrial PC (Logic)
[7-2] System structure with an EL1xx (Logic)