NTi Audio XL2 Sound Level Meter - Manual (Page 200)

200
Further Information
Accessories
Calibration
Certificate
Manufacturer Calibration Certificate
The calibration certificate lists the individ-
ual product data with serial number. The
calibration and adjustment procedures
follow the documentation and traceability
requirements of the EN ISO / IEC 17025
standard. Annual re-calibration of the in-
strument is recommended ensuring ac-
curate measurements.
NTi Audio # 600 000 018
Ever-ready Pouch
The Ever-ready Pouch protects the XL2
during transport and operation. With its
convenient belt-clip, the XL2 can be kept
close-by for those tasks requiring both
hands. The Ever-ready Pouch allows oper-
ation of the XL2 while fitted in the pouch.
NTi Audio #: 600 000 335
Mains Power Adapter
Mains Power Adapter the XL2 Audio and
Acoustic Analyzer with removable plug
types. The Mains Power Adapter suits the
typical power sockets in Australia, China,
Europe, Japan, US and UK.
NTi Audio #: 600 000 333
Spare Li-Po Battery
Rechargeable spare battery for portable
measurements at any time.
NTi Audio #: 600 000 337
48V -> ICP® Adapter
Connects to the XL2 and generates ICP
power supply for alternative microphones
or sensors.
Specifications:
(@ sensor sensitivity = 50 mV/Pa and out-
put impedance < 100 Ohm)
Residual Noise Floor typical: 17 dB(A) •
Maximum SPL: 140 dB •
NTi Audio #: 600 010 223
ICP® is a registered trademark of PCB Piezotronics.