SATEC PM130 PLUS Manual - Manual (Page 13)

‎Chapter 1 General I N F O R M A T I O N Features
PM130 PLUS Powermeter Series 13
 True RMS, volts, amps, power, power factor, neutral current,
voltage and current unbalance, frequency
 Ampere/Volt demand meter
 25/50/60/400 Hz measurement capabilities
Billing/TOU Energy Meter (PM130E and PM130EH)
 Class 0.5S IEC 62053-22 four-quadrant active and reactive
energy polyphase static meter
 Three-phase total and per phase energy measurements; active,
reactive and apparent energy counters
 Time-of-Use, 4 totalization and tariff energy/demand registers x 8
tariffs, 4 seasons x 4 types of days, 8 tariff changes per day,
 One–time easy programmable tariff calendar schedule
 Automatic daily energy and maximum demand profile log for total
and tariff registers
Harmonic Analyzer (PM130EH)
 Voltage and current THD, current TDD and K-Factor, up to 40th
order harmonic
 Voltage and current harmonic spectrum and angles
Real-time Waveform Capture
 Real-time “scope mode” waveform monitoring capability
 Simultaneous 6-channel one-cycle waveform capture at a rate of
64 samples per cycle
Programmable Logical Controller
 Embedded programmable controller
 16 control setpoints; programmable thresholds and delays
 Relay output control (see Available Options )
 1-cycle response time
Event and Data Recording (PM130E and PM130EH)
 Non-volatile memory for long-term event and data recording
 Event recorder for logging internal diagnostic events and setup
changes
 Two data recorders; programmable data logs on a periodic basis;
automatic daily energy and maximum demand profile log
Digital I/O
 Optional four or twelve digital inputs with 1-ms scan time;
automatic recording of last five digital input change events with
timestamps (see the PM130 PLUS Modbus Reference Guide)
 Optional two or four relay outputs with 1-cycle update time;
unlatched, latched, pulse and KYZ operation; energy pulses
Display
 Easy to read 3-row (2x4 characters + 1x5 characters) bright LED
display, adjustable update time and brightness
 Auto-scroll option with adjustable page exposition time; auto-
return to a default page