SATEC PM130 PLUS Manual - Manual (Page 58)

‎Chapter 4 Using P A S S O F T W A R E Creating A N E W S I T E F O R Y O U R M E T E R
58 PM130 PLUS Powermeter Series
Figure ‎4-1: Configuration Dialog Box – Instrument Setup Tab
2. Click the Sites button on the right-hand-side.
3. From the Look in box, select the directory where a new
database will be stored. By default, it is the Sites directory.
4. Type a site name for your device in the File name box, click
New, and then click OK.
5. On the Instrument Setup tab, select PM130 PLUS in the
Model box. PAS automatically selects the appropriate
instrument options for your meter.
6. Select a correct CT secondary current (5A or 1A) for your
meter.
7. If you wish to add any comments for your meter, type the
comments in the Comment box.