SATEC PM130 PLUS Manual - Manual (Page 20)

‎Chapter 2 Installation Mechanical I N S T A L L A T I O N
20 PM130 PLUS Powermeter Series
Panel Mounting
To mount the meter in cutout (ANSI 4" round or DIN 92x92mm
square cutout):
1. Position the meter in the cutout.
2. Affix the meter using washers and nuts. (Add short text on
Panel Mounting, a heading should always have text)
Figure ‎2-2. Mounting
DIN Rail Mounting
The PM130 can be mounted on a 35-mm DIN rail.
Figure ‎2-3. Dimensions