SATEC PM130 PLUS Manual - Manual (Page 62)

‎Chapter 4 Using P A S S O F T W A R E Setting U P T H E M E T E R
62 PM130 PLUS Powermeter Series
To copy a setup from another site’s database:
1. Click Open.
2. Select the desired source site database.
3. Click OK. The opened setup is copied to your dialog window.
4. Click the Save as… button.
5. Select the target database from the file pane.
6. Click OK.
To copy all setups from one site database to another site's
database:
1. In the list box on the toolbar, select a
source device site from which you wish
to copy setups.
2. Select Copy to... from the Meter Setup menu.
3. Select the target site database to which you wish to copy
setups, and click OK.
Downloading Setups to the Meter
You can update each setup in your meter one at a time or download all
setups together from the site database.
Individual Download
To update a particular setup in your meter:
1. Check the On-line button on the PAS
toolbar
2. Select a meter site from the list box on the toolbar.
3. Select the desired setup group from the Meter Setup menu.
Click on the setup tab you want to download to the meter. As
the setup dialog box opens, PAS retrieves and displays the
present meter setup data.
4. If you wish to download a setup saved in the site database,
click Open, and then click OK, or fill in the boxes with the
desired configuration data for your device.
5. Click Send.
Batch Download
To download all setups to your device at once:
1. Check the On-line button on the PAS
toolbar
2. Select the device site from the list box on the toolbar.
3. Select Download Setups from the Meter Setup menu.
Uploading Setups from the Meter
Individual Upload
To get a particular setup from your device:
1. Check the On-line button on the PAS
toolbar.
2. Select a meter site from the list box on the toolbar, and then
select the desired setup group from the Meter Setup menu.