SATEC PM135 Manual - Manual (Page 137)

‎Chapter 9 Viewing Files Viewing Options
PM135 Powermeter Series 137
Printing a Table
To check how your document appears on a printed page, select Print
Preview from the File menu.
To print a table to a printer, click on the print button
on the toolbar,
select a printer and click OK.
Working with Graphic Windows
Selecting Channels
To select the channels you want to view on the screen, click on the graph
window with the right mouse button, select Channels..., check the
channels you want displayed, and then click OK.
Checkboxes for channels that are not available in the present view are
dimmed.
Selecting Primary and Secondary Units
Voltages and currents can be displayed in primary or secondary units.
To change units, click on the table with the right mouse button, select
Options, select the desired units for voltages and currents, and then click
OK.
Selecting the Time Axis
In waveform views, the horizontal axis can be displayed either in absolute
time with date and time stamps, or in milliseconds relatively to the
beginning of a waveform.
To change the time units, click on the waveform window with the right
mouse button, select Options..., click on the Axes tab, select the desired
units, and then click OK.
Selecting Line Styles and Colors
Channel waveforms can be displayed using different colors and line styles.
To change the colors or line styles, click on the graph window with the
right mouse button, select Options..., click on the Display tab, adjust
colors and styles, and then click OK.
Selecting Grid and Frame Colors
Click on the graph window with the right mouse button, select Options...,
and click on the Display tab
To change the color or style of the grid lines, click on the Grid line on the
left pane, and then select the color and style for the grid. To disable the
grid, uncheck the Grid Visible box.
To change the window frame color to white, check the White Frame box
at right.
Using Marker Lines
The waveform and trend windows have two blue dashed marker lines. The
left marker indicates the starting position and the right marker indicates
the end position for calculating the average and peak values.
The minimum distance between the two markers is exactly one cycle.
To change the marker position, click on the button, or click on the
window with the right mouse button and select Set Marker, and then
click on the point where you want to put the marker.