SATEC PM135 Manual - Manual (Page 41)

‎Chapter 3 Using Front Display Display Operations
PM135 Powermeter Series 41
Navigation Buttons
The PM135 is provided with five navigation buttons as described
below:
Button Operation
SELECT/ENTER
TAB – browse from submenu to next submenu or
move to required digit setup
PAGE DOWN– scrolling DOWN
PAGE UP – scrolling UP
ESCAPE
The SELECT/ENTER button - function changes depending
on the display mode:
 While navigating to submenus, pressing the
SELECT/ENTER button selects the highlighted line
menu
 In "Basic Setup" or "Device Setup" menus, while
changing
device parameters pressing the
SELECT/ENTER button stores the parameter
changes into the device
The TAB button - function changes depending on the
current display:
 In display data mode – monitoring, pressing the
TAB button moves from current data display to next
data display
 For instance, in "Basic Setup" selecting "CT Primary
Current A", pressing the TAB button moves to next
digit to be set
The UP/DOWN scroll buttons - function changes
depending on the current display:
 In display menu mode – pressing the UP/DOWN
scroll
buttons, navigates between each
function/parameter in menus screens
 In display data mode – pressing the UP/DOWN
scroll buttons, navigates from current display data
screen to next display data screen
The ESC/MENU button - function changes depending on the
current display:
 In display menu mode – while in sub-menu,
pressing the ESC/MENU button, moves to upper
menu screen
 In display data mode – pressing the ESC/MENU
button, moves to Main Menu screen