SATEC PM135 Manual - Manual (Page 67)

‎Chapter 4 Using PAS Software Setting Up the Meter
PM135 Powermeter Series 67
2. Select the target database from the
file pane.
3. Click OK.
You can also reuse a setup from another site by copying it to your present
site database.
To copy a setup from another site’s database:
1. Click Open.
2. Select the desired source site
database.
3. Click OK. The opened setup is
copied to your dialog window.
4. Click the Save as… button.
5. Select the target database from the
file pane.
6. Click OK.
To copy all setups from one site database to another site's
database:
1. In the list box on the toolbar, select
a source device site from which you
wish to copy setups.
2. Select Copy to... from the Meter
Setup menu.
3. Select the target site database to
which you wish to copy setups, and
click OK.
Downloading Setups to the Meter
You can update each setup in your meter one at a time or download all
setups together from the site database.
Individual Download
To update a particular setup in your meter:
1. Check the On-line button on the
PAS toolbar
2. Select a meter site from the list box
on the toolbar.
3. Select the desired setup group from
the Meter Setup menu. Click on
the setup tab you want to download
to the meter. As the setup dialog
box opens, PAS retrieves and
displays the present meter setup
data.
4. If you wish to download a setup
saved in the site database, click
Open, and then click OK, or fill in
the
boxes with the desired
configuration data for your device.
5. Click Send.