Rockwell Automation 23P PowerFlex DC Stand Alone Regulator and Gate Amplifier - Manual (Page 13)

Rockwell Automation Publication 23P-UM001D-EN-P - July 2012
13
Chapter
2
Stand Alone Regulator Installation, Wiring
and Configuration
Prepare for Installation
Prior to installation of the PowerFlex DC Stand Alone Regulator (SAR) read the
General Precautions on
page 9 .
Mounting Considerations Operating Conditions and Temperatures
The SAR is designed to operate at 0°…50° C (32°… 122° F) surrounding air
temperature without derating. The unit must be mounted in a clean, dry location.
Contaminants such as oils, corrosive vapors and abrasive debris must be kept out
of the enclosure. NEMA/UL Type Open, IP20 enclosures are intended for
indoor use primarily to provide a degree of protection against contact with
enclosed equipment. These enclosures offer no protection against airborne
contaminants.