Rockwell Automation 23P PowerFlex DC Stand Alone Regulator and Gate Amplifier - Manual (Page 44)

44 Rockwell Automation Publication 23P-UM001D-EN-P - July 2012
Chapter 3 Gate Amplifier Installation and Wiring
Power and Ground Wiring Figure 17 - Power and Ground Connections
Table 9 - Terminal Specifications
1
2
3
4
No. Name Description
Part Number for Customer Plug
(provided with Gate Amplifier)
Wire Size Range Recommended
Maximum Minimum Torque
Input Power
Terminal Block
L1, L2, Ground Input power - Line
(L1), Neutral (L2)
and Ground 94809302 4.0 mm 2
(10 AWG)
2.5 mm 2
(14 AWG)
0.68 N•m
(6.0 lb•in)
Ground Stud Chassis Ground Refer to Chassis Grounding on page 45 for more information.
External Gate
Power Supply External Gate
Power Supply
(if used) 94809301 10 AWG, Twisted Pair,
2 Twists / in. 18 AWG, Twisted Pair,
2 Twists / in. 0.68 N•m
(6.0 lb•in)
Ready Relay Ready Relay Drive
Run Permissive
Interlock
(1)
PN-26501 4.0 mm
2
(10 AWG)
2.50 mm
2
(14 AWG)
0.55 N•m
(5.0 lb•in)
(1) Ready relay contacts are normally open rated at 2 Amps, 120VAC.
1
2
3
4