Rockwell Automation 20D PowerFlex 700H to 700S Phase II Control Conversion (Frames 9...14) User Manual
Page 22
Advertising
Publication 20C-IN001D-EN-P
22
7. Remove the screw that secures the two grounding straps to the frame of the
enclosure, if present.
8. Re-secure only one of the grounding straps to the control frame with the
screw provided, leaving the other grounding strap loose.
Remove screw
Install screw and one
grounding strap, leave
second strap loose
Advertising
This manual is related to the following products: