Rockwell Automation 20D PowerFlex 700H to 700S Phase II Control Conversion (Frames 9...14) User Manual
Page 41
Advertising
![background image](/manuals/577078/41/background.png)
41
Publication 20C-IN001D-EN-P
Step 9: Documenting the
Change
1. Install the new PowerFlex 700S label below the DPI / HIM assembly.
2. Install the new LED Status Indicators label.
3. Record the modification on the Field Installed Option label.
Install PowerFlex 700S
label
Install new LED Status
Indicator label
Advertising
This manual is related to the following products: