Rockwell Automation 20D PowerFlex 700H to 700S Phase II Control Conversion (Frames 9...14) User Manual
Page 32
Advertising
![background image](/manuals/577078/32/background.png)
Publication 20C-IN001D-EN-P
32
6. Insert the two screws for the mounting bracket into the holes in the control
assembly mounting plate but do not tighten.
7. Slide the slots of the mounting bracket onto the screws on the control
assembly mounting plate and tighten the screws.
Mounting Bracket
Advertising
This manual is related to the following products: