Rockwell Automation 825-MDN Smart Motor Manager DeviceNet Communication Card User Manual - Manual (Page 11)

Chapter
2
Installation
Chapter Objectives
In this chapter you will learn how to:
•
Remove the rear cover from the Bulletin 825 SMM
•
Install the Communication Card in the Bulletin 825 SMM
•
Wire the DeviceNet communication cables
Read this chapter completely before you attempt to install or
configure your Communication Card. Check all connections and
option selections before you apply power.
ATTENTION
!
This card contains ESD(Electrostatic Discharge)
sensitive parts and assemblies. Static control
precautions are required when installing, testing,
servicing, or repairing this assembly. Component
damage may result if ESDcontrol procedures are not
followed. If you are not familiar with static control
procedures, reference Allen-Bradley Publication
8000-4.5.2 Guarding Against Electrostatic Damage
or any other applicable ESD protection handbook.