Rockwell Automation 825-MDN Smart Motor Manager DeviceNet Communication Card User Manual - Manual (Page 39)

Publication 825-UM002A-EN-P - December 2000
A-17
Parameters Supported, Continued
Parameter
No.
®=read-only
Parameter Name Object
Mapping
Description Data
Type Units Min/Max Default
51 EF C Warning 0x2C-1-126 Earth Fault (core balance) Trip, Warning,
0=OFF 1=ON BOOL 0…1 0
52 EF C Warn Level 0x2C-1-127 Earth Fault (core balance) Warning, Level UINT mA 5…50,000 500
53 EF C Warn Relay 0x29-1-108 Earth Fault (core balance) Warning, Relay
Assignment USINT 1…7 1
54 Short Circ Trip 0x2C-1-128 Short Circuit Protection, 0=OFF 1=ON BOOL 0…1 0
55 SC Trip Level 0x2C-1-129 Short Circuit Trip Level (4.0…12.0 times
FLC) USINT times
0.1FLC 40…120 100
56 SC Trip Delay 0x2C-1-130 Short Circuit Trip Delay Time USINT 10 ms 2…99 5
57 SC Trip Relay 0x29-1-109 Short Circuit Relay Assignment USINT 2, 7 2
58 Underload Trip 0x2C-1-131 Underload Protection, 0=OFF 1=ON BOOL 0…1 0
59 UL Trip Level 0x2C-1-132 Underload Trip Level USINT % FLC 25…100 75
60 UL Trip Delay 0x2C-1-133 Underload Trip Delay Time USINT seconds 1…60 10
61 UL Trip Relay 0x29-1-110 Underload Trip Relay Assignment USINT 0…7 0
62 UL Start Delay 0x2C-1-134 Underload Trip Start Delay USINT seconds 0…240 0
63 UL Warning 0x2C-1-135 Underload Warning, 0=OFF 1=ON BOOL 0…1 0
64 UL Warning Relay 0x29-1-111 Underload Warning, Relay Assignment USINT 1…7 1
65 Star Delta 0x29-1-112 Star-Delta Starting, 0=OFF 1=ON BOOL 0…1 0
66 ® Star Relay 0x29-1-113 Star-Delta Starting, Star Relay USINT 5 5
67 ® Delta Relay 0x29-1-114 Star-Delta Starting, Delta Relay USINT 6 6
68 Set Star Time 0x29-1-115 Star-Delta Starting, Max. Star-Time,
0=OFF 1=ON BOOL 0…1 0
69 Max. Star Time 0x29-1-116 Star-Delta Starting, Max. Star-Time, USINT s 1…240 10
70 Warm Starting 0x2C-1-136 Warm Start 0=OFF 1=ON BOOL 0…1 0
71 Warm Start Every 0x2C-1-137 Warm Start Allowed Every ___ Minutes USINT minutes 4…60 60
72 Warm Trip Time 0x2C-1-138 Warm Start Trip Time, as % of Tripping
Time From Cold USINT % 50…100 70
73 Start Inhibit 0x2C-1-139 Limiting the Number of Starts/Hour,
0=OFF 1=ON BOOL 0…1 0
74 Max Starts/Hour 0x2C-1-140 Maximum number of Starts/Hour USINT Starts/
hr 1…10 2
75 Start Inhib Rel 0x29-1-117 Maximum Starts/Hour, Relay Assignment USINT 0…7 0
76 Start Control 0x2C-1-141 Monitoring Starting Time, 0=OFF 1=ON BOOL 0…1 0