Rockwell Automation 20G PowerFlex 755 IP00 NEMA/UL Open Drive - Frames 8-10 - Manual (Page 64)

64 Rockwell Automation Publication 750-IN020C-EN-P - May 2012
PowerFlex 755 IP00, NEMA/UL Open Type Drive
I/O Module
Input Mode Jumpers
I/O Option Module Terminal Block Specifications
20-750-2262C-2R (24 Volts DC)
20-750-2263C-1R2T (24 Volts DC)
20-750-2262D-2R (120 Volts AC)
ATTENTION: Risk of equipment damage exists. Ensure that the correct voltage
is applied to the I/O Module digital inputs. Refer to the I/O Module catalog
number to determine the voltage rating.
• 20-750-2262C-2R is rated 24 Volts DC
• 20-750-2262C-1R2T is rated 24 Volts DC
• 20-750-2262D-2R is rated 120 Volts AC
Jumper
Position
Voltage Mode Current Mode
Name
Wire Size Range Torque
Strip
Length
Maximum Minimum Maximum Recommended
I/O Module TB1 2.5 mm 2
(14 AWG)
0.3 mm 2
(28 AWG)
0.25 N•m
(2.2 lb•in) 0.2 N•m
(1.8 lb•in) 6 mm
(0.24 in.)
I/O Module TB2 4.0 mm
2
(12 AWG)
0.25 mm
2
(24 AWG)
0.5 N•m
(4.4 lb•in) 0.4 N•m
(3.5 lb•in) 7 mm
(0.28 in.)
Ai0
Ai1
Ai0
Ai1