Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 User Manual
Page 293
Publication 1404-UM001D-EN-E - October 2004
Sample Applications C-39
This rung looks for the done bit with no errors. When the done bit is received the return information is tranfered and mainten ance is
performed. Integer information can be read from file N10:0. Float information can be read from F8:0. The enable and done bit s are turned
off and the bit N7:9 is latched to notify the user that the transfer was successful. Bit B3:0/1 is set to transfer any floats t o the F8:0 file after
swapping words from the incomming message.
0004
N7:0
13
Done Bit
B3:0
0
Message Pending
N7:0
8
Time Out Bit
N7:0
12
Error bit
COP
Copy File
Source #M0:3.1350
Dest
#N10:0
Length
64
COP
U
B3:0
0
Message Pending
U
N9:11
1
Perform Read
U
N9:11
0
Allow Write
U
N7:0
15
Enable Transfer Bit
U
N7:0
13
Done Bit
L
N7:0
9
Transfer Successful
L
B3:0
1
Swap Words