Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 326)

Publication 1404-UM001D-EN-E - October 2004
G-2 Powermonitor 3000 ControlNet Device Profile
Identity Object
The Identity Object is used to provide identification information about
the device. The Powermonitor 3000 system supports two instances of
the identity object to provide identity information about the PM 3000
itself as well as the DC.
Section 5-2 of the CIP Common Specification provides additional
details about this object.
Class Attributes
Instance Attributes
Assembly Connection or Message Router
PCCC Message Router
NVS Message Router
Table G.2 Interface
Object Interface
Class Code: 01
hex
Table G.3 Class Attributes
Attr
ID Acces
s Name Data Type Default
Value
0x01 Get Revision UINT 1
0x02 Get Max Instance UINT 2
0x06 Get Max Class Attribute UINT 7
0x07 Get Max Instance Attribute UINT 7
Table G.4 Instance Attributes
Attr
ID Acces
s Name Data Type
0x01 Get Vendor ID UINT
0x02 Get Device Type UINT
0x03 Get Product Code UINT
0x04 Get Revision Struct of: