Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions - Manual (Page 10)

1 Removable terminals, blue
2 LC display Display for showing
 the measured values
 the current output values
 the fault messages
 the parameterization mode
3 Keypad


ESC
OK
Four keys for selecting the displayed values, the current
output values and for setting the parameters of the
device Up
Down
Escape
Confirmation
4 Place for labeling
5 Removable terminals, green
6 Programming socket RS 232 serial interface for a connection to a PC for
setting parameters and diagnosis of the device using
FDT
7 yellow LEDs Outputs Out 1 ... 4, indicating relay status
8 red LEDs Indicating faults
9 green LEDs Indicating power supply
Bul. 937
C HART Loop Converter Installation Instructions
8