Current outputs, Activating rebuild – Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions User Manual
Page 31
Bul. 937C HART Loop Converter Installation Instructions
If the connection to the field device has been lost, the localization phase can be
performed with
Rebuild without switching the device off and on again.
1.
Select
On Rebuild with the or buttons.
2.
Confirm your selection with
OK.
The display
On Rebuild flashes.
3.
Press the
OK button.
The device searches for connected field devices when booting.
4.
Press the
ESC button once or multiple times to switch to display mode.
Current Outputs
In the
Output menu, you have the option of defining current outputs 1 to 3 of the device.
The menu structure is identical for the three current outputs. Current output 1 is described
as an example. For information on relay contact outputs.
OK →
← ESC
OK →
← ESC
▼
disabled
PV
▲
▼
▼
Iout1
OK →
← ESC
OK →
← ESC
4 - 20
unlimited
4 - 20 NE43
▲
▼
SV
▼
TV
▼
QV
▼
OK →
← ESC
▲
▼
▲
▼
Output
Assignment
Characteristic
Start Value
see section
Activating Rebuild
29