Selecting relay contact output menus – Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions User Manual
Page 36
Advertising
![background image](/manuals/579061/36/background.png)
Bul. 937C HART Loop Converter Installation Instructions
Selecting Relay Contact Output Menus
1.
Select the desired relay contact output using the or buttons.
2.
Confirm your entry with OK.
The relay contact output menus
trip value and fault signal are displayed.
The active menu is marked as
On.
3.
If you would like to activate the other menu, select this menu with or .
4.
Press the
OK button twice.
The active menu is marked as
On. The submenu is displayed.
5.
If you would like to cancel activation, press the
ESC button after the first OK.
34
Advertising