Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions - Manual (Page 7)

The respective peak values of the field device and the associated apparatus with regard
to explosion protection should be considered when connecting intrinsically safe field
devices with intrinsically safe circuits of associated apparatus (verification of intrinsic
safety). Make sure to observe IEC/EN 60079-14 and IEC/EN 60079-25.
If more channels of one device are connected in parallel, make sure the parallel
connection is made directly at the terminals of the device. When verifying the intrinsic
safety, the maximum values for the parallel connection must be considered.
Operation, Maintenance, Repair
The devices must not be repaired, changed or manipulated. If there is a defect, the
product must always be replaced with an original device.
Delivery, Transport, Disposal
Check the packaging and contents for damage.
Check if you have received every item and if the items received are the ones you ordered.
Keep the original packaging. Always store and transport the device in the original packaging.
Always store the device in a clean and dry environment. The permitted storage
temperature (see data sheet) must be considered.
Disposing of devices, packaging material, and possibly contained batteries must be
in compliance with the applicable laws and guidelines of the respective country.
Bul. 937
C HART Loop Converter Installation Instructions
5