Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions - Manual (Page 23)

Bul. 937C HART Loop Converter Installation Instructions
Entering Numbers
At the lowest menu level of the Parameter menu, you have the option of selecting
or entering a numerical value.
Selecting a Numerical Value
1. Select the parameter for which you want to change the numerical value.
2. Press the OK button.
The current value flashes.
3.
Select a value from the list of values using the  and 
buttons.
The new value flashes. The value is not stored.
4. Confirm your selection with OK.
The new value does not flash. The value is stored.
1. Select the parameter where you want to enter the numerical value.
2. Press the OK button.
The current value flashes.
3. To change the value in steps, press the  or  button. or
To change the value more quickly, press and hold the  or 
button.
The new value flashes. The value is not stored.
4. Confirm your selection with OK.
The new value is stored.
OK →
← ESC
OK ↓
← ESC
← ESC
▼ ▲
↓
Parameter Current value, flashing
New value, flashing,
not stored
New value, not flashing,
stored
21
Entering a Numerical Value