Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions - Manual (Page 24)

Bul. 937C HART Loop Converter Installation Instructions
Entering Floating Point Figures
At the lowest menu level of the Parameter menu, you have the option of entering floating
point figures.
The floating point figures can have the following structure:
For a floating point figure, you must enter the following parameters:

four digits of the mantissa (decimals) for positive numbers

a minus sign and three digits for the mantissa for negative numbers

the position of the decimal point in or after the mantissa

the exponents
Positive number Input Negative number Input
43210000 43.21 E06 -3210000 -3.21 E06
4321000 4321 E03 -321000 -321 E03
432100 432.1 E03 -32100 -32.1 E03
43210 43.21 E03 -3210 -3.21 E03
4321 4321 E00 -321 -321 E00
432.1 432.1 E00 -32.1 -32.1 E00
43.21 43.21 E00 -3.21 -3.21 E00
1.234 1.234 E00
0.1234 123.4 E-03 -0.123 -123 E-03
0.01234 12.34 E-03 -0.0123 -12.3 E-03
0.001234 1.234 E-03 -0.00123 -1.23 E-03
0.0001234 123.4 E-06 -0.000123 -123 E-06
22