Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions - Manual (Page 20)

Configuration
Configuring the Device
Configure the device using the buttons on the front side. Use the  ,, ESC, and OK
buttons for navigation. The following chapters contain more detailed information about
the menus.
The navigation principle is shown using the following example:
The menu items from the lowest menu level are outlined in bold.
Fault in the plant
Changing the device data changes the device function.
Before entering new device data, make sure the plant is not endangered by
changing the device data.
Caution!
OK →
← ESC
← ESC
← ESC
← ESC
← ESC
OK →
← ESC
▼ ▲
▼ ▲
▼ ▲
▼ ▲
Iout1
4 - 20 NE43
Assignment
Characteristic
Start Value
End Value
Fault Current
Lowest menu level
Attention
Bul. 937
C HART Loop Converter Installation Instructions
18