Technical specifications default settings – Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions User Manual
Page 48
Technical Specifications
Default Settings
The following table provides an overview of the default settings. Information about
resetting the device to the default setting see Service.
Tip
If the device parameters have changed, enter these changes in the "Custom Value"
column. This provides an overview of your individual device settings.
Bul. 937
C HART Loop Converter Installation Instructions
46
Menu
Parameters
Default setting
Custom value
Unit
PV
--- Type
auto
SV
--- Type
auto
TV
--- Type
auto
QV
---Type
auto
HARTcom
Mode
secondary
TimeOut
10 s
ComControl
auto detect
ShortAddress
0
LocateMethod
search
Output
--- Iout1
Assignment
disabled
Characteristic
4 - 20 NE43
Start value
0.000
End value
100.0
Fault current
down
Output
--- Iout2
Assignment
disabled
Characteristic
4 - 20 NE43
Start value
0.000
End value
100.0
Fault current
down