Selecting an assignment – Rockwell Automation 937CU-AIHLP-DC1 HART Loop Converter Installation Instructions User Manual
Page 38
Bul. 937C HART Loop Converter Installation Instructions
Selecting an Assignment
The values of the HART variables selected here (PV, SV, TV, QV) are monitored using a
relay contact output. The number of available variables depends on the HART field
device. When
disabled is selected, the relay remains constant in a de-energized state.
1.
Select the desired HART variable using the or buttons.
2.
Confirm your selection with
OK.
Selecting the switching characteristics defines the switching direction and the direction
of operation. See applications.
1.
Select the switching direction
min or max with the or buttons.
2.
Confirm your selection with
OK.
3.
Select the direction of operation
passive or active with the or buttons.
4.
Confirm your selection with
OK.
OK →
← ESC
▼
▼
OK →
← ESC
On
OFF
▼
0 s ... 250 s
OK →
← ESC
▲
▼
Mode
Delay
Restart Inhibit
passive
active
36