Rockwell Automation 1794-L34 FlexLogix Controller System User Manual - Manual (Page 18)

Publication 1794-UM001G-EN-P - January 2007
18 Directly Connect to the Controller via the Serial Port
Configure the Serial Driver Use RSLinx software to configure the RS-232 DF1 Device driver for
serial communications. To configure the driver:
1. From the Communications menu in RSLinx software, select
Configure Drivers. Choose the RS-232 DF1 Device driver.
2. Click Add New to add the driver.
3. Specify the driver name and click OK.
ATTENTION
CH
The FlexLogix controller is grounded through its DIN rail. It is
important that you understand the workstation’s grounding
system before connecting it to the controller. An isolator is
recommended between the controller and the workstation.