Rockwell Automation 1794-L34 FlexLogix Controller System User Manual User Manual
Page 81
Advertising
![background image](/manuals/579129/81/background.png)
Publication 1794-UM001G-EN-P - January 2007
Develop Applications 81
• If Module_Status is any value other than 4, the controller is not
communicating with the module.
Interrupt the execution of logic and execute the fault handler
1. In the controller organizer, right-click the module and select
Properties.
2. Click the Connection tab.
3. Select (check) the Major Fault If Connection Fails While in Run
Mode check box.
Advertising