Rockwell Automation 1794-L34 FlexLogix Controller System User Manual - Manual (Page 20)

Publication 1794-UM001G-EN-P - January 2007
20 Directly Connect to the Controller via the Serial Port
Select the Controller Path In RSLogix 5000 software, select the controller path on the network.
1. Open an RSLogix 5000 project for the controller.
2. From the Communications menu, select Who Active.
3. Expand the communication driver to the level of the controller.
4. Select the controller.
You may have to confirm the action.
To: Choose:
monitor the project in the controller Go Online
transfer a copy of the project from the controller to
RSLogix 5000 software Upload
transfer the open project to the controller Download