For more information – Rockwell Automation 1794-L34 FlexLogix Controller System User Manual User Manual
Page 34
Advertising
![background image](/manuals/579129/34/background.png)
Publication 1794-UM001G-EN-P - January 2007
34 Communicate over Networks
To configure the controller for DF1 communications:
For more information...
The Logix5000 Controllers General Instructions Reference Manual,
1756-RM003 defines the instructions you can use to manipulate ASCII
characters.
The SCADA System Application Guide, AG-UM008 provides
information on how to:
• select a polling mode
• configure controllers, modems, and software
• troubleshoot basic DF1 protocol issues
On this tab
Do this
1. Select System Mode
2. Specify communication settings
1. Select DF1 protocol
2. Specify DF1 settings
Advertising