Communicate with ascii devices – Rockwell Automation 1794-L34 FlexLogix Controller System User Manual User Manual
Page 35
Advertising
Publication 1794-UM001G-EN-P - January 2007
Communicate over Networks 35
Communicate with ASCII devices
When configured for user mode, you can use the serial port to
interface with ASCII devices. For example, you can use the serial port
to:
• read ASCII characters from a weigh scale module or bar code
reader
• send and receive messages from an ASCII triggered device, such
as a MessageView terminal.
connection from the serial port of the controller to the ASCII device
Advertising