Rockwell Automation 1794-L34 FlexLogix Controller System User Manual - Manual (Page 53)

53 Publication 1794-UM001G-EN-P - January 2007
Chapter
5
Place, Configure, and Monitor I/O
Use This Chapter
Select I/O Modules When selecting 1794 FLEX I/O modules, select:
• Select a communication adapter - Choose the network for your
operating system
• Select I/O modules based on field devices
• Select a terminal base - Choose an appropriate terminal base for
your modules
• Select power supplies and make sure there is sufficient power
for the communication adapter and modules
For this information: See:
Select I/O Modules 53
Place Local I/O Modules 54
Configure I/O 55
Configure Distributed I/O on EtherNet/IP 59
Configure Distributed I/O on ControlNet 60
Configure Distributed I/O on DeviceNet 61
Address I/O Data 62
Determine When Data Is Updated 63
Reconfigure an I/O Module 66
See:
• FLEX I/O and FLEX EX Selection
Guide, 1794-SG002