Rockwell Automation 1794-L34 FlexLogix Controller System User Manual - Manual (Page 66)

Publication 1794-UM001G-EN-P - January 2007
66 Place, Configure, and Monitor I/O
Reconfigure an I/O Module If an I/O module support reconfiguration, you can reconfigure the
module via:
• Module Properties dialog in RSLogix 5000 software
• MSG instruction in program logic
Reconfigure a module via RSLogix 5000 software
To change the configuration of an I/O module via RSLogix 5000
software, highlight the module in the I/O Configuration tree.
Right-click and select Properties.
WARNING
Use care when changing the configuration of an I/O module.
You could inadvertently cause the I/O module to operate
incorrectly.