Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module User Manual
Page 23
Advertising
![background image](/manuals/579309/23/background.png)
Publication 1756-UM525A-EN-P - June 2003
23
Installing the 1756-HYD02 Module Chapter 2
Assembling The Removable
Terminal Block and the
Housing
Removable housing covers the wired RTB to protect wiring connections when
the RTB is seated on the module.
1.
Align the grooves at the bottom of each side of the housing with the
side edges of the RTB.
2.
Slide the RTB into the housing until it snaps into place.
20858-M
Housing
RTB
Groove
Groove
Side edge of RTB
Side edge of RTB
Strain relief area
IMPORTANT
If additional wire routing space is required for your application,
use extended-depth housing 1756-TBE.
Advertising