Creating a new module – Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module User Manual
Page 33
Advertising
Publication 1756-UM525A-EN-P - June 2003
33
Configuring the 1756-HYD02 Module Chapter 3
Creating a New Module
After you have started RSLogix 5000 and created a controller, you must create
a new module. The wizard allows you to create a new module and configure it.
1.
If your application is online, go offline.
2.
Access the Select Module Type screen.
IMPORTANT
You must be offline when you create a new module.
Use this pull-down menu
to go offline
A. Select I/O Configuration.
B. Right-click to see the menu.
C. Select New Module.
Advertising