Editing configuration – Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module User Manual
Page 38
Advertising
![background image](/manuals/579309/38/background.png)
38
Publication 1756-UM525A-EN-P - June 2003
Chapter 3 Configuring the 1756-HYD02 Module
Editing Configuration
After you set configuration for a module, you can review and change it. You
can change configuration data and download it to the controller while online.
This is called dynamic reconfiguration.
Your freedom to change some configurable features, though, depends on
whether the controller is in Remote Run mode or Program mode.
The editing process begins on the main page of RSLogix 5000.
IMPORTANT
Although you can change configuration while online, you must
go offline to add or delete modules from the program.
A. Right-click on the 1756-HYD02
module.
B. Select Properties.
C. Click on the tab of the page you
want to view or reconfigure.
Advertising