Rockwell Automation 1756-HYD02 ControlLogix Hydraulic Servo Module - Manual (Page 34)

34 Publication 1756-UM525A-EN-P - June 2003
Chapter 3 Configuring the 1756-HYD02 Module
3. Select the module type.
4. Begin configuration on the naming screen.
A. Select the Hydraulic
Servo module
B. Make sure the
Major Revision
number matches
the label on the
side of your module
C. Click here.
If you are using default
configuration, click here and you are
finished configuring your module.
Go to page 37.
If you are altering the
default configuration,
click here.
Go to page 35.
A. Name the module.
B. Add a description (optional).
C. Make sure the Minor
Revision number matches
the label on the side of your
module.
E. Select the slot in which
your module resides.
F. Choose an Electronic
Keying method. A detailed
explanation of this field is
provided on page 44.